5.5 - 8 Amp Rain/Mains Controller - Dual Pump With BMS - Single Phase

Product Features
Enclosure:
IP56 weatherproof rating
Powder coated mild steel
Inner door and removable gland plate
Protection:
Padlockable mains power isolator switch
Circuit breaker protected low voltage control and input circuitry
Individual pump isolation
Contactor and thermal overload protection of pumps
Electronic short and overload protection of strobe/buzzer
Alarms:
Visual (strobe) and audible (buzzer) alarms
Control & interface:
Electronic keypad
Indicator lights for power on, level alarm, pump run/fault, rain/mains water and system fault
Audible and visual alarm mute/reset/test button
System test button for checking pump and valve function
Auto/off/manual operation of pumps
Dipswitches for input and operation configuration
Input options:
4x digital 12Vdc inputs for float/pressure/flow switches
Standard terminal setup: Low level float switch and lead/lag/low pressure switches
Outputs:
2x pump supply outputs
1x 12Vdc output for solenoid valve
BMS volt free outputs for power on, mains water, pump run and pump fault

Included with panel:
25mm female/female 12Vdc pulse latching solenoid valve
Function Features
Operation:
Maximum run timer and auto alternation of pump duty
Anti seize timer runs pumps periodically during low use
Optional time out on manual pump mode
Staggered pump start
Smart auto silencing and chirp mode alarm
If rain water becomes available, the controller pulse closes the mains water valve and the pump will provide rain water
In the event of rain water depletion, pump fault or power failure, the controller shuts off the pump and pulses the valve open for mains water use
Fault protection:
Pump overload fault shut-down
Low level pump shut-down
Low flow/prime loss shut-down
Optional maximum pump run time shut-down
Optional Modifications
316 stainless steel enclosure
Generator input socket and automatic changeover
4G SMS alarm sender
Conductivity relays and probe inputs
Other valve sizes available
FPC-32220 Range - Single Phase (230Vac)
Code
Overload Rating
Enclosure Size
FPC-32220-AA
1.6 - 2.5 Amp
400x400x200mm
FPC-32220-A
2.5 - 4 Amp
400x400x200mm
FPC-32220-B
4 - 6 Amp
400x400x200mm
FPC-32220-BB
5.5 - 8 Amp
400x400x200mm
FPC-32220-C
7 - 10 Amp
400x400x200mm
FPC-32220-D
9 - 13 Amp
400x400x200mm
Alternative Overload Ratings available on request