Brooks FireTracker 1 Loop- 255 Device Analogue Addressable Fire Panel

Firetracker FT128V2 is an intelligent analogue addressable fire alarm system, conforming to the AS7240-2 Control and Indicating Equipment, AS7240-4 Power Supply, AS4428.3 Fire Brigade Panel standards and NZS4512. It meets the most stringent requirements in order to secure real fire alarms and to reduce nuisance alarms.

Features

• A user-friendly PC software EBLWin is used to create, edit, download and upload (backup) the Site Specific Data (SSD).
• An SSD Auto generation function is included in EBLWin. The units that are connected to Firetracker FT128V2 can be identified and the SSD can be auto generated with default settings and be edited before the download.
• Compensationfor contamination, i.e. analogue smoke detectors have constant sensitivity in spite of any contamination. A Service signal will be given when a detector has to be replaced.

• Advanced alarm algorithms are used to filter the nuisance alarms from the real fire alarms and one algorithm is used for detection of smouldering fires.

• User related functions, e.g. Test mode, Disablements, Alert annunciation, Fire door closing, Interlocking combinations of outputs & inputs, Time channels, Co-incidence alarm, User definable text message for each alarm point, etc.

• Programmable inputs and outputs. In the c.i.e. and/or via I/O units on the COM loop. A large number of trigger conditions are available.

• Outputs for routing equipment. Fire alarm and Fault outputs.
• Interface
• Optional RS485 transceiver 4552 provides an interface for up to eight display units.
• Optional expansion boards 458x mounted in an exp. board holder, provides zone line inputs 4580, relay outputs 4581 and I/O board 4583.