Save 33%
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
The analog heat detector 3309 measures the temperature through a thermistor. The temperature range is 0°C to 100°C in steps of 0.5°C. The detector has an LED that will light up when the detector goes into alarm. The detector also has an output for an external LED. The address setting tool 3314 is used to set the detector's COM loop address. The detector has an address label inside, where the address is to be written.
The 3314 addressing tool is also used to set the detector mode.
Heat detectors are normally used where smoke detectors cannot be used or in rooms where the temperature can be expected to rise rapidly in case of a fire. The detector is intended for outdoor use (must not be exposed to heavy sunlight) or in high humidity indoor premises. The thermistor, the LED, all electronics, etc. is mounted in waterproof detector housing, mounted on a connection box.
Main Features
Different modes for compatibility with other firetracker systems / detectors
Algorithms for class A1, A2 S or B S
ATEX compliance
Waterproof (IP67)
