Save 34%
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
The detectors are conventional fixed temperature heat detectors, i.e. they will give an alarm within a response temperature range in accordance with AS7240.5. The sensing element is a heat pick-up shield and a bimetal switch. An LED on the detector (not on model 6298) will light up when the detector goes into alarm.
The detector also has an output for an external LED. The static response temperature, class & temperature range for the 6296 is, 72°C, class B S (69 to 85°C).
The detectors are latching, i.e. they will not be automatically reset if the temperature, after the alarm, falls below the detector's static response temperature. The detector's LED and a connected ext. LED will be lit until the detector is reset via the c.i.e. The heat pick-up shield, the LED, all electronics, etc. are mounted in a grey waterproof detector housing, to be mounted on the attached connection box, which has three cable inlets. Three compression glands and a silicon gasket for IP67 are also attached.
A label holder intended for a label showing" zone number", can be mounted in the connection box.
Can be used on conventional panels and as an option on the firetracker 128 and 512
Main Features
Fixed temperature alarm level
ATEX compliance
Waterproof (IP67)
